Where can I find an exploded view diagram of my bike?
You've come to the right place!
How do I adjust my Flip Chips?
Remove upper and lower bone link bolts on each side, then remove the 3
flip chip bolts from each side. Flip your Chips 180deg on a horizontal
axis. The desired position is noted on the upward facet. The Flip Chip
position will be visible when sitting on the bike and should read
Low/X-Low depending on model.
What derailleur hanger does my bike use?
The Insurgent LS uses a SRAM Universal Derailleur Hanger.
Which bottom bracket (BB) standard does my bike utilize?
The Insurgent LS utilizes a threaded BSA 73mm bottom bracket. We
recommend pairing your BB & crankset brands to assure compatibility.
What crankset spacing does my bike require?
The Insurgent LS requires a SuperBoost crankset with a 56.5 mm chain
line. Boost cranksets cannot be modified to work with this frame.
My chainring is slightly off-center in the upper guide.
If the chainring is too far inboard, try moving one non-driveside spacer
to the drive side. If that doesn’t solve the problem, you likely have a
non-SuperBoost chainring and need the proper SuperBoost (0mm offset)
If the chainring is too far outboard, try removing one drive side BB
spacer and placing that on the non-driveside.
What size chainrings can I use?
Round: 30-36t / Oval: 32t-34t
Can my Evil frame take a 2x drivetrain?
No. The Insurgent LS is designed around a 1x drivetrain.
Will my bike accept an aftermarket chain guide?
Yes. The Insurgent LS has lower ISCG05 tabs to accommodate aftermarket
lower chain guides and bash guards.
What is my bike's rear axle spacing?
The Insurgent LS utilizes SuperBoost (12x157mm) rear spacing.
What size wheels and tires fit my bike?
The Insurgent LS is designed to accommodate a 27.5” rear wheel with (up
to) 2.6" tires. Front tire clearance is dependent on your fork
What seat post diameter does the Offering LS utilize?
The Insurgent LS has a 30.9mm seat post.
What seat post clamp diameter does the Offering LS utilize?
The Insurgent LS utilizes a 34.9mm clamp diameter.
What is the longest dropper post I can run?
Please email firstname.lastname@example.org with the following information:
Your BB center to seat rail center measurement, in the pedaling
Crank length- should be noted on the medial (center-facing) side of
your driveside crank.
- Which dropper post(s) you are looking at.
Our service robots will promptly get back to you with options. If you
prefer to do the math yourself you can find the seat tube length on row
"D" of the Insurgent LS geometry chart on our website. Maximum insertion
depths are as follows:
- Small - 180mm
- Medium - 220mm
- Large - 250mm
- X-Large - 285mm
What type of brake mount does my bike have?
The Insurgent LS has a post mount 180mm rear. The front mount depends on
your fork make & model.
What is my maximum rear brake rotor size?
The Insurgent LS accepts up to a 203mm rotor.
What type of headset does my bike require?
The Insurgent LS requires a (Zero Stack) ZS44, ZS62 headset. Few
alternatives exist. Consult email@example.com if you have a headset
that you are unsure about.
What type of steerer tube does my bike use?
The Insurgent LS requires a tapered steerer (1 1/8" - 1 1/2").
What is my frame's minimum steerer tube length?
With zero spacers, assuming a stem stack height of 40mm, your Insurgent
LS requires a steerer length of no less than:
- Small - 155mm
- Medium - 165mm
- Large - 175mm
- X-Large - 190mm
Fork manufacturers recommend no more than 30mm of spacers between stem
and the upper race. The provided measurements account for 0mm additional
stack height (no spacers between stem & dust cap), with a 40mm stack
What fork offset should I run?
The Insurgent LS is designed around a 44mm fork offset.
How much fork travel can my bike accommodate?
The Insurgent LS is recommended to be paired with a 170mm 29”, or 180mm
How much travel (suspension) does my bike have?
The Insurgent LS has 168mm of rear wheel travel. Recommended fork travel
is 170mm (MX) and 180mm (27.5).
What size shock does my frame utilize?
The Insurgent LS utilizes a 205x65mm Trunnion-mount shock.
What size shock mount hardware does my bike require?
The Insurgent LS utilizes a Trunnion-mounted upper and requires 8x20mm
lower shock mount hardware.
What approved shock options are available?
Rockshox Super Deluxe Coil - RS SDLXC ULT RCT 205X65ML 320 ST A2 SHAFT
END:TRUNION | BODY END: 8X20 Fox Float X2 - CL002 - JCR010 - BV3 - 2VS
Push ElevenSix - Contact Push for custom tune
It is important to note that each EVIL frame requires a specific damper
tune. Often, a standard off-the-shelf tune will not capitalize on the
inherent qualities of the DELTA linkage. Other options may exist. If you
are interested in a damper that is not specified on this list, please
consult our friendly customer service team at firstname.lastname@example.org.
What is the paint code on my bike?
Space Bot - Pantone 533 C
What is the warranty on my bike?
Limited Lifetime Warranty information can be found here -